NPH10S2405IC Datasheet PDF - muRata

●The NPH10S2405IC is an isolated single-output DC/DC Converter combines ease of application with versatility. The pin pattern is based on the popular industry standard, but two additional pins may optionally be fitted to provide a variety of features not commonly found on units of this type. High efficiency enables full rating to be achieved in a small package without heat-sinking. It is thermally protected against sustained overload. The copper case achieves efficient heat transfer and screening. It has been recognized by Underwriters Laboratory (UL) to UL 1950 for operational insulation.

● Industry standard pin-out

● Non latching current limit

● Operation to zero load

● Protected against load faults

● Internal over temperature protection

● Uses no electrolytic capacitors

● Fixed frequency

● No external components required

● Up to 1.5Wcm³ power density

● 12W Surge rating

● 1.5kV Input to output isolation

● Continuous rating to 10W at 72°C without heat-sink

● 83% Efficiency

● 470µF Maximum load capacitance