NPH15S2415IC Datasheet PDF - muRata

●The NPH15S2415IC is an isolated single-output DC/DC Converter combines ease of application with versatility. The pin pattern is based on the popular industry standard, but two additional pins may optionally be fitted to provide a variety of features not commonly found on units of this type. High efficiency enables full rating to be achieved without heat-sinking and a high surge capability will provide for start-up and transient loads, whilst being thermally protected against sustained overload. Overload protection of the constant current type ensures start-up into complex load conditions. It achieves efficient heat transfer and screening. The product range has been recognized by Underwriters Laboratory (UL) to UL 1950 for operational insulation.

● Industry standard pin-out

● Non latching current limit

● Operation to zero load

● Protected against load faults

● Internal over temperature protection

● Uses no electrolytic capacitors

● Up to 2.4W/cm³ power density

● Constant 350kHz frequency

● 1.5kV input to output isolation

● Continuous rating to 30W at 40°C without heat-sink

● 87% Efficiency