PCA9542APW Datasheet PDF - NXP

●General description

●The PCA9542A is a 1-of-2 bidirectional translating multiplexer, controlled via the I2C-bus. The SCL/SDA upstream pair fans out to two SCx/SDx downstream pairs, or channels. Only one SCx/SDx channel is selected at a time, determined by the contents of the programmable control register. Two interrupt inputs, INT0 and INT1, one for each of the SCx/SDx downstream pairs, are provided. One interrupt output, INT, which acts as an AND of the two interrupt inputs, is provided.

●Features

●■ 1-of-2 bidirectional translating multiplexer

●■ I2C-bus interface logic; compatible with SMBus

●■ 2 active LOW interrupt inputs (INT0, INT1)

●■ Active LOW interrupt output (INT)

●■ 3 address pins allowing up to 8 devices on the I2C-bus

●■ Channel selection via I2C-bus

●■ Powers up with all multiplexer channels deselected

●■ Low Ron switches

●■ Allows voltage level translation between 1.8 V, 2.5 V, 3.3 V and 5 V buses

●■ No glitch on power-up

●■ Supports hot insertion

●■ Low standby current

●■ Operating power supply voltage range of 2.3 V to 5.5 V

●■ 5 V tolerant inputs

●■ 0 Hz to 400 kHz clock frequency

●■ ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per JESD22-A115 and 1000 V CDM per JESD22-C101

●■ Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA

●■ Packages offered: SO14, TSSOP14