PI90LV02TEX Datasheet PDF - Pericom Semiconductor

●Description

●The PI90LV02 and PI90LVT02 are single differential line receivers that use low-voltage differential signaling (LVDS) to support data rates up to 400 Mbps. These products are designed for applications requiring high-speed, low-power consumption, low-noise genera tion, and a small package.

●A differential input signal (350mV) is translated by the device to a 3.3V CMOS output level. The PI90LVT02 integrates the terminating resistor while the PI90LV02 requires an external resistor.

●Features

●• Meets or Exceeds the Requirements of ANSI TIA/EIA-644-1995 Standard

●• Signaling rates up to 400 Mbps

●• Interfaces to LVDS, LVPECL

●• Bus-Terminal ESD exceeds 10kV

●• Differential Input Voltage Threshold less than 100mV

●• Typical Propagation Delay Times of 2.6ns

●• Typical Power Dissipation of 40mW @200 MHz

●• Low Voltage TTL (LVTTL) Level is 5V Tolerant

●• Open-Circuit Fail Safe

●• Output are High Impedance with VCC <1.5V

●• Integrated 110-ohm Line Termination Resistor (PI90LVT02)

●• Operates from a 3.3V supply

●• Input common-mode voltage range 0V–3.2V

●• Industrial Temperature Operating Range: –40°C to 85°C

●• Packaging (Pb-free & Green available):

●   - 5-pin space-saving SOT23 (T)

●Applications

●  Applications include point-to-point and multi-drop baseband data transmissions over impedance media of approximately 100-ohms. The transmission media can be printed circuit board traces, backplanes, or cables.

●The PI90LV02 and PI90LVT02 and companion line drivers (PI90LV01 and PI90LVB01) provide new alternatives to RS-232, PECL, and ECL devices for high-speed, point-to-point interface applications.