●GENERAL DESCRIPTION
●The PIC16CXX is a family of low-cost, high-perfor mance, CMOS, fully-static, 8-bit microcontrollers.
●PIC16C6X Microcontroller Core Features:
●• High performance RISC CPU
●• Only 35 single word instructions to learn
●• All single cycle instructions except for program branches which are two-cycle
●• Operating speed: DC - 20 MHz clock input
● DC - 200 ns instruction cycle
●• Interrupt capability
●• Eight level deep hardware stack
●• Direct, indirect, and relative addressing modes
●• Power-on Reset (POR)
●• Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
●• Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
●• Programmable code-protection
●• Power saving SLEEP mode
●• Selectable oscillator options
●• Low-power, high-speed CMOS EPROM/ROM technology
●• Fully static design
●• Wide operating voltage range: 2.5V to 6.0V
●• Commercial, Industrial, and Extended temperature ranges
●• Low-power consumption:
●•< 2 mA @ 5V, 4 MHz
●•15 µA typical @ 3V, 32 kHz
●•< 1 µA typical standby current
●PIC16C6X Peripheral Features:
●• Timer0: 8-bit timer/counter with 8-bit prescaler
●• Timer1: 16-bit timer/counter with prescaler, can be incremented during sleep via external crystal/clock
●• Timer2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler
●• Capture/Compare/PWM (CCP) module(s)
●• Capture is 16-bit, max resolution is 12.5 ns, Compare is 16-bit, max resolution is 200 ns, PWM max resolution is 10-bit.
●• Synchronous Serial Port (SSP) with SPI and I2C
●• Universal Synchronous Asynchronous Receiver Transmitter (USART/SCI)
●• Parallel Slave Port (PSP) 8-bits wide, with external RD, WRand CScontrols
●• Brown-out detection circuitry for Brown-out Reset (BOR)
