●The RC1180HP-RC232 is a 868.0MHz to 870.0MHz high power multichannel RF transceiver module. This is a compact surface mounted high performance module for FSK operation with embedded protocol. The module is completely shielded and precertified for operation under the European and Indian radio regulations. The module contains a communication controller with embedded RC232 protocol software, a high performance RF transceiver with an internal voltage regulator and a power amplifier. This module offers a buffered packet radio in the RC232 embedded protocol. Using the buffered packet radio mode, all data to be sent is stored in the module before they are transmitted by the RF circuitry. The module can be set in SLEEP mode in order to reduce the power consumption.
● High power, long range (3Km to 5Km line of sight)
● Completely shielded module for SMD mounting
● Embedded RC232 protocol with addressing and error check
● Two wire UART interface for easy RS232/RS422/RS485 wire replacement (handshake optional)
● Conforms with EU R&TTE directive and no external components required
● No configuration required for single channel use
● 12.7mm x 25.4mm x 3.3mm compact module for SMD mounting
● 2.7V to 3.3V supply voltage, ultra low power modes
● Designed for EX compliance
● Max output power of 27dBm
●ESD sensitive device, take proper precaution while handling the device.
●Noisy external circuitry may under certain scenarios affect the transmitted signal on RC1180HP-RC232 module so precaution should be taken during the operation.
