●General Description
●The RTL8305S is a highly integrated layer 2 single chip switch controller which incorporates 5 MACs (Media Access Controller), 5 physical layer transceivers, 1-Mbit SRAM and 1K-entry look-up table into one single chip.
●The RTL8305S contains 5 ports, and each one provides support for a 10Base-T (10Mbps) or 100Base-TX (100Mbps) network connection. The fifth port (port 4) can be configured as a MII/SNI to work with a routing engine, HomePHY or a fiber transceiver for a 100Base-FX application. And each operation mode can be easily set up by hardware strapping upon restart or power-on.
●The RTL8305S is designed for a stand-alone switch system through hardware strapping upon reset to achieve unmanaged operation and can be easily integrated with xDSL/Cable modem router. With the least peripheral components and using a 25MHz crystal, the RTL8305S has the best system cost structure. The integrated RTL8305S chip benefits from low power consumption and ease of use for SOHO 5-port switch or xDSL/Cable router applications.
●Features
●■ 5-port integrated switch with physical layer and transceiver for 10Base-T and 100Base-TX with 5-port 10/100M UTP or 4-port 10/100M UTP + 1-port MII/SNI
●■ PHY mode MII/SNI interface for router application
●■ MAC mode MII interface for HomeLAN/100Base-FX application
●■ 1Mbit internal RAM for packet buffer
●■ Internal 1K look-up table entries
●■ 25MHz crystal or OSC input
●■ Non-blocking wire-speed reception and transmission
●■ Fully compliant with IEEE 802.3/802.3u
●■ Supports broadcast storm filtering function
●■ Support full duplex 802.3x flow control and half duplex back-pressure flow control
●■ LED indicators for link/activity, speed, full/half duplex and collision
●■ LEDs blinking upon reset for LED diagnostics
●■ Unmanaged operation by strapping upon reset
●■ Power saving with cable detection
●■ Low power consumption at 3.3V operating voltage
●■ 128-pin PQFP package
Part 3D Model
