●128 Mbit (16 Mbyte) MirrorBit® Flash Non-Volatile Memory CMOS 3.0 Volt Core
●Serial Peripheral Interface with Multi-I/O
●General Description
●The Spansion S25FL127S device is a flash non-volatile memory product using:
●■ MirrorBit technology - that stores two data bits in each memory array transistor
●■ Eclipse architecture - that dramatically improves program and erase performance
●■ 65 nm process lithography
●This device connects to a host system via a Serial Peripheral Interface (SPI). Traditional SPI single bit serial input and output (SIngle I/O or SIO) is supported as well as optional two bit (Dual I/O or DIO) and four bit (Quad I/O or QIO) serial commands. This multiple width interface is called SPI Multi-I/O or MIO.
●Features
●■ Density
● – 128 Mbits (16 Mbytes)
●■ Serial Peripheral Interface (SPI)
● – SPI Clock polarity and phase modes 0 and 3
● – Extended Addressing: 24- or 32-bit address options
● – Serial Command set and footprint compatible with S25FL-A, S25FL-K, and S25FL-P SPI families
● – Multi I/O Command set and footprint compatible with S25FL-P SPI family
●■ READ Commands
● – Normal, Fast, Dual, Quad
● – AutoBoot - power up or reset and execute a Normal or Quad read command automatically at a preselected address
● – Common Flash Interface (CFI) data for configuration information.
●■ Programming (0.8 Mbytes/s)
● – 256- or 512-byte Page Programming buffer options
● – Quad-Input Page Programming (QPP) for slow clock systems
●■ Erase (0.5 Mbytes/s)
● – Hybrid sector size option - physical set of sixteen 4-kbyte sectors at
●top or bottom of address space with all remaining sectors of
●64 kbytes
● – Uniform sector option - always erase 256-kbyte blocks for software compatibility with higher density and future devices.
●■ Cycling Endurance
● – 100,000 Program-Erase Cycles per sector minimum
●■ Data Retention
● – 20 Year Data Retention typical
●■ Security features
● – One Time Program (OTP) array of 1024 bytes
● – Block Protection:
● – Status Register bits to control protection against program or erase of a contiguous range of sectors.
● – Hardware and software control options
● – Advanced Sector Protection (ASP)
● – Individual sector protection controlled by boot code or password
●■ Spansion® 65 nm MirrorBit Technology with Eclipse™ Architecture
●■ Supply Voltage: 2.7V to 3.6V
●■ Temperature Range:
● – Industrial (-40°C to +85°C)
● – Automotive In-Cabin (-40°C to +105°C)
●■ Packages (all Pb-free)
● – 8-lead SOIC (208 mil)
● – 8-contact USON 6 x 5 mm
● – BGA-24 6 x 8 mm
● – 5 x 5 ball (FAB024) and 4 x 6 ball (FAC024) footprint options
● – Known Good Die and Known Tested Die
