●General description
●The SAA7130HL is a single chip solution to digitize and decode video, and capture it through the PCI-bus.
●Features
●PCI and DMA bus mastering
●■PCI 2.2 compliant including full Advanced Configuration and Power Interface (ACPI)
●■System vendor ID, etc. via EEPROM
●■Hardware support for virtual addressing by MMU
●■DMA bus master write for video, VBI and TS
●■Configurable PCI FIFOs, graceful overflow
●■Packed and planar video formats, overlay clipping
●TV video decoder and video scaling
●■All-standards TV decoder: NTSC, PAL and SECAM
●■Five analog video inputs: CVBS and S-video
●■Video digitizing by two 9-bit ADCs at 27 MHz
●■Sampling accordingITU-R BT.601with 720 pixels/line
●■Adaptive comb filter for NTSC and PAL, also operating for non-standard signals
●■Automatic TV standard detection
●■Three level Macrovision copy protection detection according to Macrovision detect specification revision 1
●■Control of brightness, contrast, saturation and hue
●■Versatile filter bandwidth selection
●■Horizontal and vertical downscaling or zoom
●■Adaptive anti-alias filtering
●■Capture of raw VBI samples
●■Two alternating settings for active video scaling
●■Output in YUV and RGB
●■Gamma compensation, black stretching
●TV audio I/O
●■Integrated analog audio pass-through for analog audio loopback cable to sound card
●Peripheral interface
●■I2C-bus master interface: 3.3 V and 5 V
●■Digital video output: ITU and VIP formats
●■TS input: serial or parallel
●■General purpose I/O, e.g. for strapping and interrupt
●■Propagate reset and ACPI state D3-hot
●General
●■Package: LQFP128
●■Power supply: 3.3 V only
●■Power consumption of typical application: 1 W
●■Standby state (D3-hot): < 0.02 W
Part 3D Model
