SAK-C167CR-LM HA Datasheet PDF - Infineon

●The SAK-C167CR-LM HA+ is a 16-bit single-chip CMOS Microcontroller combines high CPU performance (up to 16.5 million instructions per second) with high peripheral functionality and enhanced IO-capabilities. They also provide clock generation via PLL and various on-chip memory modules such as program ROM, internal RAM and extension RAM. The architecture combines advantages of both RISC and CISC processors and of advanced peripheral subsystems in a very well-balanced way. In addition the on-chip memory blocks allow the design of compact systems with maximum performance.

● High performance 16-bit CPU with 4-stage pipeline

● 80/60ns Instruction cycle time at 25/33MHz CPU clock

● 16 Priority-level interrupt system with 20 Sources, sample-rate down to 40ns

● 8-channel Interrupt-driven single-cycle data transfer facilities via peripheral event controller

● Clock generation via prescaler or via direct clock input

● 2kB On-chip extension RAM (XRAM)

● 16-channel 10-bit ADC with programmable conversion time down to 7.8µs

● Two 16-channel capture/compare units

● 4-channel PWM unit

● Two multi-functional general purpose timer units with 5 timers

● Two serial channels (synchronous/asynchronous and high-speed-synchronous)

● On-chip CAN Interface (Rev. 2.0B active) with 15 Message objects (Full CAN/Basic CAN)

● Up to 16MB external address space for code and data

● Idle and power down modes

● Programmable watchdog timer and oscillator watchdog

● On-chip bootstrap loader