●Summary of Features
●• High-performance 32-bit super-scalar TriCore V1.3.1 CPU with 4-stage pipeline
●– Superior real-time performance
●– Strong bit handling
●– Fully integrated DSP capabilities
●– Single precision Floating Point Unit (FPU)
●– 180 or 1501) MHz operation at full temperature range
●• 32-bit Peripheral Control Processor with single cycle instruction (PCP2)
●– 16 Kbyte Parameter Memory (PRAM)
●– 32 Kbyte Code Memory (CMEM)
●– 180 or1501) MHz operation at full temperature range
●• Multiple on-chip memories
●– 4 or 31) Mbyte Program Flash Memory (PFLASH) with ECC
●– 64 Kbyte Data Flash Memory (DFLASH) usable for EEPROM emulation
●– 128 Kbyte Data Memory (LDRAM)
●– 40 Kbyte Code Scratchpad Memory (SPRAM)
●– Instruction Cache: up to 16 Kbyte (ICACHE, configurable)
●– Data Cache: up to 4 Kbyte (DCACHE, configurable)
●– 8 Kbyte Overlay Memory (OVRAM)
●– 16 Kbyte BootROM (BROM)
●• 16-Channel DMA Controller
●• 32-bit External Bus Interface Unit (EBU) with
●– 32-bit demultiplexed / 16-bit multiplexed external bus interface (3.3V, 2.5V)
●– Support for Burst Flash memory devices
●– Scalable external bus timing up to 75 MHz
●• Sophisticated interrupt system with 2 × 255 hardware priority arbitration levels
●serviced by CPU or PCP2
●• High performing on-chip bus structure
●– 64-bit Local Memory Buses between CPU, EBU, Flash and Data Memory
●– 32-bit System Peripheral Bus (SPB) for on-chip peripheral and functional units
●– One bus bridges (LFI Bridge)
●• Versatile On-chip Peripheral Units
●– Two Asynchronous/Synchronous Serial Channels (ASC) with baud rate generator, parity, framing and overrun error detection
●– Two High-Speed Synchronous Serial Channels (SSC) with programmable data length and shift direction
●– Two serial Micro Second Bus interface (MSC) for serial port expansion to external power devices
●– Two High-Speed Micro Link interface (MLI) for serial inter-processor communication
●– One MultiCAN Module with 4 CAN nodes and 128 free assignable message objects for high efficiency data handling via FIFO buffering and gateway data transfer
●– One FlexRayTM module with 2 channels (E-Ray).
●– Two General Purpose Timer Array Modules (GPTA) with additional Local Timer Cell Array (LTCA2) providing a powerful set of digital signal filtering and timer functionality to realize autonomous and complex Input/Output management
