●The SGM7222 is a high-speed, low-power double-pole/double-throw (DPDT) analog switch that operates from a single 1.8V to 4.3V power supply.
●SGM7222 is designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os.
●The SGM7222 has low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps). Each switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. Its bandwidth is wide enough to pass high-speed USB 2.0 differential signals (480 Mb/s) with good signal integrity.
●The SGM7222 contains special circuitry on the D+/D pins which allows the device to withstand a VBUS short to D+ or D- when the USB devices are either powered off or powered on.
●SGM7222 is available in Green TQFN-1.8×1.4-10L, MSOP-10 and UTQFN-1.8×1.4-10L packages. It operates over an ambient temperature range of -40℃ to +85℃.
●FEATURES
●• RON is Typically 4.5Ω at 3.0V
●• Low Bit-to-Bit Skew: 50ps (TYP)
●• Voltage Operation: 1.8V to 4.3V
●• Fast Switching Times:
● tON 10ns
● tOFF 22ns
●• Low Crosstalk: -41dB at 250MHz
●• Power-Off Protection when V+ = 0V,
● D+/D- Pins can Tolerate up to 5.25V
●• High Off-Isolation: -35dB at 250MHz
●• Rail-to-Rail Input and Output Operation
●• Break-Before-Make Switching
●• Extended Industrial Temperature Range:
● -40℃ to +85℃
●• Small Packages:
● MSOP-10, TQFN-1.8×1.4-10L and
● UTQFN-1.8×1.4-10L
