SN65HVD232DRG4 Datasheet PDF - TI

●DESCRIPTION

●The SN65HVD230, SN65HVD231, and SN65HVD232 controller area network (CAN) transceivers are designed for use with the Texas Instruments TMS320Lx240x™; 3.3-V DSPs with CAN controllers, or with equivalent devices. They are intended for use in applications employing the CAN serial communication physical layer in accordance with the ISO 11898 standard. Each CAN transceiver is designed to provide differential transmit capability to the bus and differential receive capability to a CAN controller at speeds up to 1 Mbps.

●FEATURES

●• Motor Control • Operates With a 3.3-V Supply

●• Low Power Replacement for the PCA82C250 Footprint

●• Basestation Control and Status

●• Robotics

●• Bus/Pin ESD Protection Exceeds 16 kV HBM

●• High Input Impedance Allows for 120 Nodes

●• UPS Control on a Bus

●• Controlled Driver Output Transition Times for Improved Signal Quality on the SN65HVD230 and SN65HVD231

●• Unpowered Node Does Not Disturb the Bus

●• Compatible With the Requirements of the ISO 11898 Standard

●• Low-Current SN65HVD230 Standby Mode 370 µA Typical

●• Low-Current SN65HVD231 Sleep Mode 40 nA Typical

●• Designed for Signaling Rates(1) up to 1 Megabit/Second (Mbps)

●• Thermal Shutdown Protection

●• Open-Circuit Fail-Safe Design

●• Glitch-Free Power-Up and Power-Down Protection for Hot-Plugging Applications

●(1) The signaling rate of a line is the number of voltage transitions that are made per second expressed in the units bps (bits per second).

●APPLICATIONS

●• Motor Control

●• Industrial Automation

●• Basestation Control and Status

●• Robotics

●• Automotive

●• UPS Control