SN65LVDS180 Datasheet PDF - TI

●The SN65LVDS179, SN65LVDS180, SN65LVDS050, and SN65LVDS051 devices are differential line drivers and receivers that use low-voltage differential signaling (LVDS) to achieve signaling rates as high as 400 Mbps. The TIA/EIA-644 standard-compliant electrical interface provides a minimum differential output voltage magnitude of 247 mV into a 100-Ω load and receipt of 100-mV signals with up to 1 V of ground potential difference between a transmitter and receiver.

●These devices offer various driver, receiver, and enabling combinations in industry-standard footprints. Because these devices are intended for use in simplex or distributed simplex bus structures, the driver enable function does not put the differential outputs into a high-impedance state but rather disconnects the input and reduces the quiescent power used by the device. For these functions with a high-impedance driver output, see the SN65LVDM series of devices. All devices are characterized for operation from –40°C to 85°C.

● Meets or Exceeds the Requirements of ANSI

●TIA/EIA-644-1995 Standard

● Full-Duplex Signaling Rates up to 150 Mbps

● Bus-Pin ESD Exceeds 12 kV

● Operates From a Single 3.3-V Supply

● Low-Voltage Differential Signaling With Typical

●Output Voltages of 350 mV and a 100-Ω Load

● Propagation Delay Times

● Driver: 1.7 ns Typical

● Receiver: 3.7 ns Typical

● Power Dissipation at 200 MHz

● Driver: 25 mW Typical

● Receiver: 60 mW Typical

● LVTTL Input Levels Are 5-V Tolerant

● Receiver Maintains High Input Impedance With

●VCC < 1.5 V

● Receiver Has Open-Circuit Fail Safe