TLC5924 Datasheet PDF - TI

●The TLC5924 is a 16 channel constant–current sink driver. Each channel has a On/Off state and a 128–step adjustable constant current sink (dot correction). The dot correction adjusts the brightness variations between LED, LED channels and other LED drivers. Both dot correction and On/Off state are accessible via a serial data interface. A single external resistor sets the maximum current of all 16 channels.

●Each constant–current output has a pre–charge FET that enables an improvement in image quality of the dynamic–drive LED display.

●The TLC5924 features two error information circuits. The LED open detection (LOD) indicates a broken or disconnected LED at an output terminal. The thermal error flag (TEF) indicates an over–temperature condition.

● 16 Channels

● Drive Capability

● 0 to 80 mA (Constant–Current Sink)

● Constant Current Accuracy: ±1% (typical)

● Serial Data Interface

● Fast Switching Output: Tr / Tf = 10ns (typical)

● CMOS Level Input/Output

● 30 MHz Data Transfer Rate

● VCC = 3.0 V to 5.5 V

● Operating Temperature = –40°C to 85°C

● LED Supply Voltage up to 17 V

● 32–pin HTSSOP(PowerPAD) and QFN Packages

● Dot Correction

● 7 bit (128 Steps)

● individual adjustable for each channel

● Controlled In–Rush Current

● Pre–Charge FET

● Error Information

● LOD: LED Open Detection

● TEF: Thermal Error Flag

● APPLICATIONS

● Monocolor, Multicolor, Fullcolor LED Display

● Monocolor, Multicolor LED Signboard

● Display Backlighting

● Multicolor LED lighting applications

●PowerPAD is a trademark of Texas Instruments.