●The TLVx170 family of electromagnetic interference (EMI)-hardened, 36-V, single-supply, low-noise operational amplifiers (op amps) feature a THD+N of 0.0002% at 1 kHz with the ability to operate on supplies ranging from 2.7 V (±1.35 V) to 36 V (±18 V). These features, along with low noise and very high power-supply rejection ratio (PSRR), make the single-channel TLV170, dual-channel TLV2170, and quad-channel TLV4170 suitable for use in microvolt-level signal amplification. The TLVx170 family of devices also offer good offset, drift, and bandwidth with low quiescent current.
●Unlike most op amps that are specified at only one supply voltage, the TLVx170 family of op amps is specified from 2.7 V to 36 V with the ability to swing input signals beyond the supply rails without phase reversal. The TLVx170 family is also unity-gain stable with a 200-pF capacitive load with a 1.2-MHz bandwidth and a 0.4-V/μs slew rate for use in current-to-voltage converters.
●The device inputs can operate 100 mV below the negative rail and within 2 V of the positive rail for normal operation, and with full rail-to-rail input with reduced performance. The TLVx170 devices are specified from –40°C to +125°C.
●For all available packages, see the orderable addendum at the end of the data sheet.
● Supply Range: 2.7 V to 36 V, ±1.35 V to ±18 V
● Low Noise: 22 nV/√Hz
● EMI-Hardened with RFI-Filtered Inputs
● Input Range Includes the Negative Supply
● Unity-Gain Stable: 200-pF Capacitive Load
● Rail-to-Rail Output
● Gain Bandwidth: 1.2 MHz
● Low Quiescent Current: 125 µA per Amplifier
● High Common-Mode Rejection: 110 dB
● Low Bias Current: 10 pA (typical)
