●The TMP435 is a remote temperature sensor monitor with a built-in local temperature sensor. The remote temperature sensor diode-connected transistors are typically low-cost, NPN- or PNP-type transistors or diodes that are an integral part of microcontrollers, microprocessors, or FPGAs.
●Remote accuracy is ±1°C for multiple IC manufacturers, with no calibration needed. The two-wire serial interface accepts SMBus write byte, read byte, send byte, and receive byte commands to program the alarm thresholds and to read temperature data.
●The TMP435 includes beta compensation (correction), series resistance cancellation, programmable non-ideality factor, programmable resolution, programmable threshold limits, minimum and maximum temperature monitors, wide remote temperature measurement range (up to +150°C), diode fault detection, a temperature alert function, and pin-programmable two-wire addressing using 3-state logic.
●The TMP435 is available in an MSOP-10 package.
● ±1°C REMOTE DIODE SENSOR
● ±1°C LOCAL TEMPERATURE SENSOR
● AUTOMATIC BETA COMPENSATION
● _n_-FACTOR CORRECTION
● PROGRAMMABLE THRESHOLD LIMITS
● TWO-WIRE/SMBus SERIAL INTERFACE
● MINIMUM AND MAXIMUM TEMPERATURE MONITORS
● MULTIPLE INTERFACE ADDRESSES
● ALERT/THERM2 PIN CONFIGURATION
● DIODE FAULT DETECTION
● PIN-PROGRAMMABLE TWO-WIRE ADDRESSING
● APPLICATIONS
● LCD/DLP/LCOS PROJECTORS
● SERVERS
● INDUSTRIAL CONTROLLERS
● CENTRAL OFFICE TELECOM EQUIPMENT
● DESKTOP AND NOTEBOOK COMPUTERS
● STORAGE AREA NETWORKS (SAN)
● INDUSTRIAL AND MEDICAL EQUIPMENT
● PROCESSOR/FPGA TEMPERATURE MONITORING
●DLP is a registered trademark of Texas Instruments.
●SMBus is a trademark of Intel Corporation.
●All other trademarks are the property of their respective owners.
Part 3D Model
