●The TMS320C62x DSPs (including the TMS320C6201) are the fixed-point DSP family in the TMS320C6000 DSP platform. The C6201 device is based on the high-performance, advanced VelociTI very-long-instruction-word (VLIW) architecture developed by Texas Instruments (TI), making these DSPs an excellent choice for multichannel and multifunction applications. With performance of up to 1600 MIPS at a clock rate of 200 MHz, the C6201 offers cost-effective solutions to high-performance DSP programming challenges. The C6201 DSP possesses the operational flexibility of high-speed controllers and the numerical capability of array processors. The processor has 32 general-purpose registers of 32-bit word length and eight highly independent functional units. The eight functional units provide six arithmetic logic units (ALUs) for a high degree of parallelism and two 16-bit multipliers for a 32-bit result. The C6201 can produce two multiply-accumulates (MACs) per cycle--for a total of 466 million MACs per second (MMACS). The C62x DSP also has application-specific hardware logic, on-chip memory, and additional on-chip peripherals.
●The C6201 includes a large bank of on-chip memory and has a powerful and diverse set of peripherals. Program memory consists of a 64K-byte block that is user-configurable as cache or memory-mapped program space. Data memory of the C6201 consists of two 32K-byte blocks of RAM for improved concurrency. The peripheral set includes two multichannel buffered serial ports (McBSPs), two general-purpose timers, a host-port interface (HPI), and a glueless external memory interface (EMIF) capable of interfacing to SDRAM or SBSRAM and asynchronous peripherals.
●The C62x DSP has a complete set of development tools which includes: a new C compiler, an assembly optimizer to simplify programming and scheduling, and a Windows debugger interface for visibility into source code execution.
● High-Performance Fixed-Point Digital Signal Processor (DSP) TMS320C6201
● 5-ns Instruction Cycle Time
● 200-MHz Clock Rate
● Eight 32-Bit Instructions/Cycle
● 1600 MIPS
● VelociTI Advanced Very Long Instruction Word (VLIW) TMS320C62x DSP CPU Core
● Eight Independent Functional Units:
● Six ALUs (32-/40-Bit)
● Two 16-Bit Multipliers (32-Bit Results)
● Load-Store Architecture With 32 32-Bit General-Purpose Registers
● Instruction Packing Reduces Code Size
● All Instructions Conditional
● Instruction Set Features
● Byte-Addressable (8-, 16-, 32-Bit Data)
● 32-Bit Address Range
● 8-Bit Overflow Protection
● Saturation
● Bit-Field Extract, Set, Clear
● Bit-Counting
● Normalization
● 1M-Bit On-Chip SRAM
● 512K-Bit Internal Program/Cache (16K 32-Bit Instructions)
● 512K-Bit Dual-Access Internal Data (64K Bytes) Organized as Two Blocks for Improved Concurrency
● 32-Bit External Memory Interface (EMIF)
● Glueless Interface to Asynchronous Memories: SRAM and EPROM
● Glueless Interface to Synchronous Memories: SDRAM and SBSRAM
● Four-Channel Bootloading Direct-Memory-Access (DMA) Controller with an Auxiliary Channel
● 16-Bit Host-Port Interface (HPI)
● Access to Entire Memory Map
● Two Multichannel Buffered Serial Ports (McBSPs)
● Direct Interface to T1/E1, MVIP, SCSA Framers
● ST-Bus-Switching Compatible
● Up to 256 Channels Each
● AC97-Compatible
● Serial Peripheral Interface (SPI) Compatible (Motorola)
● Two 32-Bit General-Purpose Timers
● Flexible Phase-Locked Loop (PLL) Clock Generator
● IEEE-1149.1 (JTAG) Boundary-Scan Compatible
● 352-Pin BGA Package (GJC Suffix)
● 352-Pin BGA Package (GJL Suffix)
● CMOS Technology
● 0.18-µm/5-Level Metal Process
● 3.3-V I/Os, 1.8-V Internal
●VelociTI and TMS320C62x are trademarks of Texas Instruments.
●Motorola is a trademark of Motorola, Inc.
●IEEE Standard 1149.1-1990 Standard-Test-Access Port and Boundary Scan Architecture.
●TMS320C6000 and C62x are trademarks of Texas Instruments.
●Windows is a registered trademark of the Microsoft Corporation.
●The TMS320C6201 device shall be referred to as C6201 throughout the remainder of this document.
