●The TMS320F206 Texas Instruments (TITM) digital signal processor (DSP) is fabricated with static CMOS integrated-circuit technology, and the architectural design is based upon that of the TMS320C20x series, optimized for low-power operation. The combination of advanced Harvard architecture, on-chip peripherals, on-chip memory, and a highly specialized instruction set is the basis of the operational flexibility and speed of the "F206.
●The "F206 offers these advantages:
● 32K 16 words on-chip flash EEPROM reduces system cost and facilitates prototyping
● Enhanced TMS320 architectural design for increased performance and versatility
● Advanced integrated-circuit processing technology for increased performance
● "F206 devices are pin- and code-compatible with "C203 devices.
● Source code for the "F206 DSP is software-compatible with the "C1x and "C2x DSPs and is upwardly compatible with fifth-generation DSPs ("C5x)
● New static-design techniques for minimizing power consumption and increasing radiation tolerance
●Table 1 shows the capacity of on-chip RAM and ROM, the number of serial and parallel I/O ports, the execution time of one machine cycle, and the type of package with total pin count of the TMS320F206 device.
● High-Performance Static CMOS Technology
● Includes the T320C2xLP Core CPU
● TMS320F206 is a Member of the TMS320C20x Generation, Which Also Includes the TMS320C203, and TMS320C209 Devices
● Instruction-Cycle Time 50 ns @ 5 V
● Source Code Compatible With TMS320C25
● Upwardly Code-Compatible With TMS320C5x Devices
● Three External Interrupts
● TMS320F206 Integrated Memory:
● 544 × 16 Words of On-Chip Dual-Access Data RAM
● 32K × 16 Words of On-Chip Flash Memory (EEPROM)
● 4K × 16 Words of On-Chip Single-Access Program/Data RAM
● 224K × 16-Bit Maximum Addressable External Memory Space
● 64K Program
● 64K Data
● 64K Input/Output (I/O)
● 32K Global
● 32-Bit ALU/Accumulator
● 16 × 16-Bit Multiplier With a 32-Bit Product
● Block Moves from Data and Program Space
● TMS320F206 Peripherals:
● On-Chip 16-Bit Timer
● On-Chip Software-Programmable Wait-State (0 to 7) Generator
● On-Chip Oscillator
● On-Chip Phase-Locked Loop (PLL)
● Six General-Purpose I/O Pins
● Full-Duplex Asynchronous Serial Port (UART)
● Enhanced Synchronous Serial Port (ESSP) With Four-Level-Deep FIFOs
● Input Clock Options
● Options - Multiply-by-One, -Two, or -Four and Divide-by-Two
● Support of Hardware Wait States
● Power Down IDLE Mode
● IEEE 1149.1-Compatible Scan-Based Emulation
● 100-Pin Thin Quad Flat Package (TQFP) (PZ Suffix)
●TI is a trademark of Texas Instruments Incorporated.
●IEEE Standard 1149.1-1990 Standard-Test-Access Port and Boundary Scan Architecture.
