TPA6100A2 Datasheet PDF - TI

●The TPA6100A2D is a stereo audio power amplifier packaged in either an 8-pin SOIC package or an 8-pin MSOP package capable of delivering 50 mW of continuous RMS power per channel into 16- loads. Amplifier gain is externally configured by a means of three resistors per input channel and does not require external compensation for settings of 1 to 10.

●The TPA6100A2D is optimized for battery applications because of its low supply current, shutdown current, and THD+N. To obtain the low-supply voltage range, the TPA6100A2D biases BYPASS to VDD/4. A resistor with a resistance equal to RF must be added from the inputs to ground to allow the output to be biased at VDD/2.

●When driving a 16- load with 45-mW output power from 3.3 V, THD+N is 0.04% at 1 kHz, and less than 0.2% across the audio band of 20 Hz to 20 kHz. For 28 mW into 32- loads, the THD+N is reduced to less than 0.03% at 1 kHz, and is less than 0.2% across the audio band of 20 Hz to 20 kHz.

● 50-mW Stereo Output

● Low Supply Current...0.75 mA

● Low Shutdown Current...50 nA

● Pin Compatible With LM4881 and TPA102(1)

● Pop Reduction Circuitry

● Internal Midrail Generation

● Thermal and Short-Circuit Protection

● Surface-Mount Packaging

● MSOP and SOIC

● 1.6-V to 3.6-V Supply Voltage Range

●(1) The polarity of the SHUTDOWN\ pin is reversed.