●The TPD3S714-Q1 is a single-chip solution for short-to-battery, short-circuit, and ESD protection for the USB connector’s VBUS and data lines in automotive USB hubs, head units, rear seat entertainment, telematics, and media interface applications. The integrated data switches provide best-in-class bandwidth for minimal signal degradation during USB short-to-battery events. The high bandwidth of 1 GHz allows for a clean USB 2.0 high-speed (480 Mbps) eye diagram with the long captive cables that are common in the automotive USB environment
●The short-to-battery protection isolates the internal system circuits from any overvoltage conditions at the VBUS_CON, VD+, and VD– pins. On these pins, the TPD3S714-Q1 can handle overvoltages up to 18 V for hot plug and DC events. The overvoltage protection circuit provides the most reliable short-to-battery isolation in the industry, shutting off the switches and protecting the upstream transceiver from harmful voltage and current spikes. The VBUS_CON pin also provides an accurate current limited load switch up to 0.5 A. The overcurrent protection automatically limits current to prevent drooping of the upstream rail during short-to-ground events. Additionally, this device also integrates system level IEC 61000-4-2 and ISO 10605 ESD protection on VBUS_CON, VD+, and VD– pins which removes the need to provide external high-voltage, low capacitance ESD diodes
● AEC-Q100 Qualified (Grade 1)
● Operating Temperature Range : –40°C to +125°C
● Short-to-Battery (up to 18 V) and Short-to-Ground Protection on VBUS_CON
● Short-to-Battery (up to 18 V) and Short-to-VBUS Protection on VD+, VD–
● IEC 61000-4-2 ESD Protection on VBUS_CON,
●VD+, VD–
● ±8-kV Contact Discharge
● ±15-kV Air Gap Discharge
● ISO 10605 330-pF, 330-Ω ESD Protection on VBUS_CON, VD+, VD–
● ±8-kV Contact Discharge
● ±15-kV Air Gap Discharge
● Low RON nFET VBUS Switch (63-mΩ Typical)
● High Speed Data Switches (1-GHz, –3-dB Bandwidth)
● Hiccup Current Limit
● 550-mA Overcurrent Limit (Minimum)
● Fast Overvoltage Response Time
● 2-µs Typical (VBUS Switch)
● 200-ns Typical (Data Switches)
● Integrated Input Enable for VBUS, VD+, VD–
● Fault Output Signal
● Thermal Shutdown Feature
● 16-Pin SSOP Package (4.9 mm × 3.9 mm)
●All trademarks are the property of their respective owners.
