TPS51218 Datasheet PDF - TI

●The TPS51218 is a small-sized single buck controller with adaptive on-time D-CAP™ mode. The device is suitable for low output voltage, high current, PC system power rail and similar point-of-load (POL) power supply in digital consumer products. A small package with minimal pin-count saves space on the PCB, while a dedicated EN pin and pre-set frequency selections minimize design effort required for new designs. The skip-mode at light load condition, strong gate drivers and low-side FET RDS(on) current sensing supports low-loss and high efficiency, over a broad load range. The conversion input voltage which is the high-side FET drain voltage ranges from 3 V to 28 V and the output voltage ranges from 0.7 V to 2.6 V. The device requires an external 5-V supply. The TPS51218 is available in a 10-pin SON package specified from –40°C to 85°C.

● Wide Input Voltage Range: 3 V to 28 V

● Output Voltage Range: 0.7 V to 2.6 V

● Wide Output Load Range: 0 to 20A+

● Built-in 0.5% 0.7 V Reference

● D-CAP™ Mode with 100-ns Load Step Response

● Adaptive On Time Control Architecture With 4 Selectable

●Frequency Setting

● 4700 ppm/°C RDS(on) Current Sensing

● Internal 1-ms Voltage Servo Softstart

● Pre-Charged Start-up Capability

● Built in Output Discharge

● Power Good Output

● Integrated Boost Switch

● Built-in OVP/UVP/OCP

● Thermal Shutdown (Non-latch)

● SON-10 (DSC) Package