●The TPS54020 is a 10-A, 4.5-V to 17-V input SWIFT converter. The innovative 3.5 mm × 3.5 mm HotRod package optimizes high-density step-down designs. The TPS54020 is a full-featured converter.
●High efficiency is achieved through the innovative integration and packaging of the high-side and low-side MOSFETs. The TPS54020 operates at continuous current mode (CCM) at higher load conditions, and transitions to Eco-mode while skipping pulses to boost the efficiency at light loads.
●Current limiting on both MOSFETs provides device and system protection. Cycle-by-cycle current limiting in the high-side MOSFET protects for overload situations. Low-side MOSFET zero current detection turns off the low-side MOSFET while operating under light loads. Three selectable current-limit thresholds allow a good fit for various applications. A hiccup or cycle-by-cycle overcurrent protection scheme is also selectable.
●Thermal shutdown protection disables switching when die temperature exceeds the thermal shutdown trip point and enables switching after the built-in thermal hysteresis and shutdown hiccup time.
●The SS pin controls the output voltage start-up ramp and allows for selectable soft-start times. Power supply sequencing is also available by configuring the enable (EN) and the open-drain power-good (PWRGD) pins.
●Two TPS54020 devices may be synchronized 180° out-of-phase by using the SYNC_OUT and CLK pins.
● Integrated 8-mΩ and 6-mΩ MOSFETs
● Thermally Enhanced 3.5-mm × 3.5-mm HotRod™
●Package
● Peak Current Mode Control
● Eco-mode™ Pulse Skip for Higher Efficiency
● Overcurrent Protection for Both MOSFETs
● Selectable Overcurrent Protection Schemes
● Selectable Overcurrent Protection Levels
● Split Power Rail: 1.6 V to 17 V on PVIN
● 0.6-V Voltage Reference With ±1% Accuracy
● 200-kHz to 1.2-MHz Switching Frequency
● Synchronizes to External Clock
● Start-Up Into Prebiased Outputs
● Overtemperature and Overvoltage Protection
● 40°C to 150°C Operating Junction
●Temperature Range
● Adjustable Soft-Start and Power Sequencing
● Power-Good Output Monitor for Undervoltage
●and Overvoltage
● SYNC_OUT Function Provides Output Clock
●Signal 180° Out-of-Phase
● Supported by WEBENCH® Software Tool
● For SWIFT™ Documentation and WEBENCH,
●visit http://www.ti.com/swift
