●As members of the SWIFT family of dc/dc regulators, the TPS54311, TPS54312, TPS54313, TPS54314, TPS54315, and TPS54316 low-input-voltage high-output current synchronous-buck PWM converters integrate all required active components. Included on the substrate with the listed features are a true, high performance, voltage error amplifier that provides high performance under transient conditions; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 3 V; an internally and externally set slow-start circuit to limit in-rush currents; and a power good output useful for processor/logic reset, fault signaling, and supply sequencing.
●The TPS54311, TPS54312, TPS54313, TPS54314, TPS54315, and TPS54316 devices are available in a thermally enhanced 20-pin TSSOP (PWP) PowerPAD package, which eliminates bulky heatsinks. Texas Instruments provides evaluation modules and the SWIFT designer software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.
● Qualified for Automotive Applications
● 60-m MOSFET Switches for High Efficiency at 3-A Continuous Output Source or Sink Current
● 0.9-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V, and 3.3-V Fixed Output Voltage Devices With 1% Initial Accuracy
● Internally Compensated for Low Parts Count
● Fast Transient Response
● Wide PWM Frequency: Fixed 350 kHz, 550 kHz, or Adjustable 280 kHz to 700 kHz
● Load Protected by Peak Current Limit and Thermal Shutdown
● Integrated Solution Reduces Board Area and Total Cost
● APPLICATIONS
● Low-Voltage, High-Density Systems With Power Distributed at 5 V or 3.3 V
● Point of Load Regulation for High Performance DSPs, FPGAs, ASICs, and Microprocessors
● Broadband, Networking and Optical Communications Infrastructure
● Automotive Telematics
●PowerPAD and SWIFT are trademarks of Texas Instruments.
Part 3D Model
