●The TPS62410 device is a synchronous dual step-down DCDC converter. It provides two independent output voltage rails powered by 1-cell Li-Ion or 3-cell NiMH/NiCD batteries. The device is also suitable to operate from a standard 3.3 V or 5 V voltage rail.
●With an input voltage range of 2.5 V to 6 V, the TPS62410 is ideal for battery powered portable applications like smart phones, PDAs, and other portable equipment.
●With the EasyScale™ serial interface, the output voltages can be modified during operation. It therefore supports dynamic voltage scaling for low-power DSP and processors.
●The TPS62410 operates at 2.25-MHz fixed switching frequency and enter the power-save mode operation at light load currents to maintain high efficiency over the entire load current range. For low-noise applications the devices can be forced into fixed frequency PWM mode by pulling the MODE/DATA pin High. In the shutdown mode, the current consumption is reduced to 1.2 µA. The device allows the use of small inductors and capacitors to achieve a small solution size.
●The TPS62410 operates over a free-air temperature range of 40°C to 85°C. It is available in a 10-pin leadless package (3 × 3 mm VSON)
● High Efficiency up to 95%
● VIN Range from 2.5 V to 6 V
● 2.25-MHz Fixed Frequency Operation
● Output Current 2 x 800 mA
● Adjustable Output Voltage from 0.6 V to VIN
● Optional EasyScale™ One-Pin Serial Interface for
●Dynamic Output Voltage Adjustment
● Power-Save Mode at Light Load Currents
● 180° Out of Phase Operation
● Output Voltage Accuracy in PWM Mode ±1%
● Typical 32-µA Quiescent Current for Both
●Converters
● 100% Duty Cycle for Lowest Dropout
● Available in a 10-Pin VSON (3 mm × 3 mm)
