●The TI TS5L100 LAN switch is a 4-bit 1-of-2 multiplexer/demultiplexer with a single switch-enable (E)\ input. When E\ is low, the switch is enabled and the I port is connected to the Y port. When E\ is high, the switch is disabled and the high-impedance state exists between the I and Y ports. The select (S) input controls the data path of the multiplexer/demultiplexer.
●This device can be used to replace mechanical relays in LAN applications. This device has low ron, wide bandwidth, and low differential crosstalk, making it suitable for 10 Base-T, 100 Base-T, and various other LAN applications.
●This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.
●To ensure the high-impedance state during power up or power down, E\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
● Wide Bandwidth (BW = 300 MHz Min)
● Low Differential Crosstalk (XTALK = 60 dB Typ)
● Low Power Consumption (ICC = 3 µA Max)
● Bidirectional Data Flow, With Near-Zero Propagation Delay
● Low ON-State Resistance (ron = 3 Typ)
● VCC Operating Range From 6 V to 6.5 V
● Ioff Supports Partial-Power-Down Mode Operation
● Data and Control Inputs Provide Undershoot Clamp Diode
● Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
● ESD Performance Tested Per JESD 22
● 2000-V Human-Body Model (A114-B, Class II)
● 1000-V Charged-Device Model (C101)
● Suitable for Both 10 Base-T/100 Base-T Signaling
