●The TUSB522P is a fourth generation, dual-channel, single-lane USB 3.1 GEN1 redriver and signal conditioner supporting 5 Gbps. The device offers low power consumption on a 3.3 V supply with its ultra-low-power architecture. The redriver also supports the USB 3.1 low power modes, which further reduces idle power consumption.
●The dual-channel capability enables the system to maintain signal integrity on both transmit and receive data paths. The receiver equalization has three gain settings to overcome channel degradation from insertion loss and inter-symbol interference. These settings are controlled from the EQ pins. To compensate for transmission line losses, the output driver supports configuration of De-Emphasis with pins DE. Additionally, automatic LFPS De-Emphasis control allows for full USB 3.1 compliance. These settings allow optimal performance, increased signaling distance, and flexibility in placement of the TUSB522P in the
●USB 3.1 GEN1 path.
● USB3.1 GEN1 5 Gbps, Dual-Channel Re-Driver with 3.3-V Power Supply
● Ultra-Low-Power Architecture
● Active: 98 mA
● U2, U3: 1.2 mA
● Disconnect 265 µA
● Shutdown 60 µA
● Optimal Receiver Equalization
● of 3, 6, 9 dB at 2.5 GHz
● Output Driver De-emphasis of 0, 3.5, and 6 dB
● Automatic LFPS De-Emphasis Control to Meet USB 3.1 Certification Requirements
● No Host/Device-Side Requirement
● Hot-Plug Capable
● Industrial Temperature Range: –40ºC to 85ºC TUSB522PI
● Commercial Temperature Range: 0ºC to 70ºC TUSB522P
●All trademarks are the property of their respective owners.
