●Overview
●The Surgelogic® EBA Series surge protective device is a non-modular parallel transient voltage surge suppressor (TVSS). The EBA device has multi-stage suppression circuits consisting of field-proven, fast-acting metal oxide varistors (MOVs). A surge suppression path is provided for each mode, line-to-neutral (L-N), line-to-line (L-L), line-to-ground (L-G), and neutral-to-ground (N-G). Each surge suppression mode is individually fused and uses circuitry with thermal cutouts to isolate the TVSS and ensure shutdown in the event of MOV damage during severe over-voltages, even when operated on high-fault current power systems. The suppression elements are encapsulated in a UL® recognized potting material, another performance element that provides additional protection. A filter provides EMI/RFI noise attenuation. On-line diagnostics continuously monitor the device status, and LEDs signal a loss of a suppression circuit. An audible alarm with an enable/disable feature and dry contacts are included in the standard diagnostic package.
●Features
● External Mounting Next to Panelboards, Switchboards, Switchgear, or Motor Control Centers (MCCs)
● Individually Fused Suppression Modes
● Thermal Cutout
● Copper Bus Bar Construction
● Solid State Bi-Directional
● Push-to-Test On-Line Diagnostic Display
● Front Panel Alarm with Enable/Disable Switch
● LED Indicators Indicate Loss of Protection, or Fully Operational Circuit
● High-Energy Parallel Design for ANSI/IEEE C62.41 and C62.45 Category B and C3 Applications
● Duty Cycle Tested (ANSI C62.41 C3, 10 kA, 20 kV) Minimum 5000 Impulses
●Specifications
● Standard Internal 200 kA Surge Rated Fusing, 200 kA Short Circuit Current Rating
● Listed to UL1449 (Second Edition) and UL1283
● Meets ANSI/IEEE C62.41 and C62.45, and UL Category Section 37.3
● NEMA Ratings: 1, 3R and 12 (Outdoor)
● Short Circuit Current Rating: 200 kA
● EMI / RFI Filtering Up to -30 dB (100 kHz to 100 MHz)
● 10-Year Warranty
● UL 1449 Listed
● UL 1283 Listed
