●The TXS02326 is a complete dual-supply standby Smart Identity Module (SIM) card solution for interfacing wireless baseband processors with two individual SIM subscriber cards to store data for mobile handset applications. It is a custom device which is used to extend a single SIM/UICC interface to be able to support two SIMs/UICCs.
●The device complies with ISO/IEC Smart-Card Interface requirements as well as GSM and 3G mobile standards. It includes a high-speed level translator capable of supporting Class-B (2.95 V) and Class-C (1.8 V) interfaces, two low-dropout (LDO) voltage regulators that have output voltages that are selectable between 2.95-V Class-B and 1.8-V Class-C interfaces, an integrated "fast-mode" 400 kb/s "slave" I2C control register interface for configuration purposes, a 32-kHz clock input for internal timing generation, a shutdown input and a comparator input detecting battery pack removal to safely power-down the two SIM cards, each equipped with two programmable debounce counter (i.e. BSI input and SDN input) circuit realized by an 8 bit counter.
●The voltage-level translator has two supply voltage pins. V_I/O sets the reference for the baseband interface and can be operated from 1.7 V to 3.3 V. VSIM1 and VSIM2 are programmed to either 1.8 V or 2.95 V, each supplied by an independent internal LDO regulator. The integrated LDO accepts input battery voltages from 2.3 V to 5.5 V and outputs up to 50 mA to the B-side circuitry and external Class-B or Class-C SIM card.
● Level Translator
● V_I/O Range of 1.7 V to 3.3 V
● Low-Dropout (LDO) Regulator
● 50-mA LDO Regulator With Enable
● 1.8-V or 2.95-V Selectable Output Voltage
● 2.3-V to 5.5-V Input Voltage Range
● Very Low Dropout: 100 mV (Max) at 50 mA
● Control and Communication Through I2C Interface With Baseband Processor
● ESD Protection Exceeds JESD 22
● 2000-V Human-Body Model (A114-B)
● 1000-V Charged-Device Model (C101)
● Package
● 24-Pin QFN (4 mm × 4 mm)
