●The ZWX Series can be used in ambient temperatures from -10°C to + 70°C with operation at 100% load from -10°C to 50°C. This specification is unique to the World"s No.1 provider of industrial power supplies.
●Features:
● Operating time at peak output is less than 5sec.
●(Average output power and current are less than maximum output power and current.)
● At total output power (Forced air) (V1=6.5A, V2=6.5A, V3=7.7A, V4=0.2A, V5=1.0A), Ta=25?.
● At total output power (Forced air).
● For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 240VAC (50/60Hz).
● Not applicable for the inrush current to Noise Filter for less than 0.2ms.
● Please refer to Fig. A for measurement of line & load regulation and ripple voltage.
● 85 - 265VAC, constant load.
● No load-Full load, constant input voltage.
● Avoid to operate at overload or short circuit condition for more than 30 seconds.
●V1, V2, V3 : OCP circuit will shut down output except V5 with delay (more than 5s), manual reset (PS_ON reset or re power on).
●V4 : Constant current limit with automatic recovery.
●V5 : Constant current limit in conjunction with all output with automatic recovery.
● OVP circuit will shut down output, manual reset (PS_ON reset or re power on).
● Measured by the each measuring method of UL, CSA, EN and DENAN (at 60Hz), Ta=25?.
● At forced air cooling, standard mounting. Refer to output derating curve.
