LMH6624 Datasheet PDF

●The LMH6624 and LMH6626 devices offer wide bandwidth (1.5 GHz for single, 1.3 GHz for dual) with very low input noise (0.92 nV/√Hz, 2.3 pA/√Hz) and ultra-low dc errors (100 µV VOS, ±0.1 µV/°C drift) providing very precise operational amplifiers with wide dynamic range. This enables the user to achieve closed-loop gains of greater than 10, in both inverting and non-inverting configurations.

●The LMH6624 (single) and LMH6626 (dual) traditional voltage feedback topology provide the following benefits: balanced inputs, low offset voltage and offset current, very low offset drift, 81dB open loop gain, 95dB common mode rejection ratio, and 88dB power supply rejection ratio.

●The LMH6624 and LMH6626 devices operate from ±2.5 V to ±6 V in dual supply mode and from 5 V to 12 V in single supply configuration.

●LMH6624 is offered in SOT-23-5 and SOIC-8 packages. The LMH6626 is offered in SOIC-8 and VSSOP-8 packages.

● VS = ±6 V, TA = 25°C, AV = 20 (Typical Values

●Unless Specified)

● Gain Bandwidth (LMH6624) 1.5 GHz

● Input Voltage Noise 0.92 nV/√Hz

● Input Offset Voltage (limit over temp) 700 µV

● Slew Rate 350 V/µs

● Slew Rate (AV = 10) 400 V/µs

● HD2 at f = 10 MHz, RL = 100 Ω −63 dBc

● HD3 at f = 10 MHz, RL = 100 Ω −80 dBc

● Supply Voltage Range (Dual Supply) 2.5 V to 6 V

● Supply Voltage Range (Single Supply) 5 V to 12 V

● Improved Replacement for the CLC425 (LMH6624)

● Stable for Closed Loop |AV| ≥ 10