Web Analytics
Part Datasheet Search > Microcontrollers > LPC2388 Datasheet PDF
Images are for reference

LPC2388 Datasheet PDF

Part Series:
LPC2388 Series
Category:
Microcontrollers
Description:
LPC2388FBD144 - ARM7 with 512KB flash, 98KB SRAM, Ethernet, USB 2.0 Device/Host/OTG, CAN, and 10Bit ADC QFP 144Pin
Updated Time: 2023/09/27 08:48:33 (UTC + 8)

LPC2388 Microcontrollers Datasheet PDF

LPC2388FBD144,551 - NXP Specifications

TYPE
DESCRIPTION
Mounting Style
Surface Mount
Frequency
72 MHz
Number of Pins
144 Pin
Supply Voltage (DC)
3.00V (min)
Case/Package
LQFP-144
show more

LPC2388FBD144,551 - NXP Function Overview

The LPC2388FBD144,551 is a 16-/32-bit Microcontroller based on ARM7TDMI-S core with RISC architecture operates at a maximum frequency of 72MHz. A 128-bit wide memory interface and an unique accelerator architecture enable 32-bit code execution at the maximum clock rate. For critical performance in interrupt service routines and DSP algorithms, this increases performance up to 30 % over Thumb mode. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty. The device incorporates 512kB internal flash, 98kB internal RAM, 8-channel 10-bit A/D converter, 10-bit D/A converter, an Ethernet, four 32-bit timers and real-time clock (RTC) and 104 general-purpose I/O pins. This device also features peripherals like four UARTs, three inter-integrated circuit (I2C), one serial peripheral interface (SPI) modules and one integrated interchip sound (I2S).
Dual Advanced high-performance bus (AHB) system
EMC provides support for static devices
Advanced vectored interrupt controller (VIC) supporting up to 32 vectored interrupts
General purpose DMA controller (GPDMA)
Ethernet MAC with associated DMA controller
USB 2.0 device/host/OTG with on-chip PHY and associated DMA controller
CAN controller with two channels
Two SSP controllers, with FIFO and multi-protocol capabilities
SD/MMC memory card interface
104 General purpose I/O pins with configurable pull-up/down resistors
PWM/timer block with support for three-phase motor control
Real-time clock (RTC) with separate power pin
2KB SRAM powered from the RTC power pin
Watchdog timer (WDT)
Standard ARM test/debug interface for compatibility with existing tools
Emulation trace module supports real-time trace
Four reduced power modes - Idle, sleep, power-down and deep power-down
Processor wake-up from power-down mode via any interrupt able to operate during power-down mode
Two independent power domains allow fine tuning of power consumption based on needed features
Each peripheral has its own clock divider for further power saving
show more
Part Datasheet PDF Search
Loading...
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.

Relate Parts