●The DAC8531 is a low-power, single, 16-bit buffered voltage output Digital-to-Analog Converter (DAC). Its on-chip precision output amplifier allows rail-to-rail output swing to be achieved. The DAC8531 uses a versatile three-wire serial interface that operates at clock rates up to 30MHz and is compatible with standard SPI, QSPI, Microwire, and Digital Signal Processor (DSP) interfaces.
●The DAC8531 requires an external reference voltage to set the output range of the DAC. The DAC8531 incorporates a power-on reset circuit that ensures that the DAC output powers up at 0V and remains there until a valid write takes place to the device. The DAC8531 contains a power-down feature, accessed over the serial interface, that reduces the current consumption of the device to 200nA at 5V.
●The low power consumption of this part in normal operation makes it ideally suited to portable battery-operated equipment. The power consumption is 2mW at 5V reducing to 1 µW in power-down mode.
●The DAC8531 is available in both MSOP-8 and 3x3 SON-8 (same size as QFN) packages.
● _micro_Power OPERATION: 250 µA at 5V
● POWER-ON RESET TO ZERO
● POWER SUPPLY: +2.7V to +5.5V
● ENSURED MONOTONIC BY DESIGN
● SETTLING TIME: 10 µs to ±0.003 FSR
● LOW-POWER SERIAL INTERFACE WITH SCHMITT-TRIGGERED INPUTS
● ON-CHIP OUTPUT BUFFER AMPLIFIER, RAIL-TO-RAIL OPERATION
● SYNC\ INTERRUPT FACILITY
● PACKAGES: MSOP-8 and 3x3 SON-8 (same size as QFN)
● APPLICATIONS
● PROCESS CONTROL
● DATA ACQUISITION SYSTEMS
● CLOSED-LOOP SERVO-CONTROL
● PC PERIPHERALS
● PORTABLE INSTRUMENTATION
● PROGRAMMABLE ATTENUATION
●All trademarks are the property of their respective owners.
Part 3D Model
