●Overview
●NXP® 56F835X and 56F815X digital signal controllers belong to the 56800E core-based DSC family. They combine digital signal processing and microcontroller functionalities on a single chip, with a flexible set of peripherals.
● On-chip integration and ease of implementation help to speed development, lower component count, and significantly reduce system cost
● Features twice as much program Flash, data RAM and boot Flash as the 56F8345/8145 while providing full pin-for-pin compatibility
● Includes an external memory interface
● Simplifies designs while promoting compliance with safety regulations
● Supported by robust development tools to simplify and accelerate time-to-market
●MoreLess
●## Features
● On-chip memory includes high-speed volatile and nonvolatile components:
● 256 KB of program Flash
● 16 KB of data RAM
● 8 KB of data Flash (835X devices)
● 4 KB of program RAM (835X devices)
● 4 KB of program Flash
● 16 KB of boot Flash
● Access up to 4 MB of off-chip program and 32 MB of data memory (56F8X57 devices)
● Up to 60 MIPS at 60 MHz execution frequency
● Chip select logic for glueless interface to ROM and SRAM
● JTAG/EOnCE for unobtrusive real-time debugging
● Four 12-bit, analog-to-digital converters (ADCs)
● Temperature sensor
● FlexCAN (CAN version 2.0 B-compliant )
● Two serial communication interfaces (SCIs)
● Up to two serial peripheral interfaces (SPIs)
● Two dedicated external interrupt pins
● Up to 76 GPIO lines
● Integrated low-voltage interrupt module
● Software-programmable phase lock loop
●## Features Comparison Table
●### Family Comparison
●| 56F834X/814X| MC56F8155| MC56F8156| MC56F8157| MC56F8355| MC56F8356| MC56F8357| 56F836X/816X
●| | | | | | |
●| | | | | | |
●MIPS| | | | | | | |
●| | | | | | |
●| | | | | | |
●| | | | | | |
●| | | | | | |
●| | | | | | |
●| | | | | | |
●| | | | | | |
●| | | | | | |
●| | | | | | |
●| | | | | | |
●| | | | | | |
Part 3D Model
