RPA60-2415SFW/N Datasheet PDF - RECOM Power

●The RPA60-2415SFW/N from Recom Power is a RPA60-FW series 60W single output DC to DC converter with negative control function. This high power density converter has 4:1 wide input voltage range and industry standard 2"x1" case size. Despite its small size, the RPA60-FW converter is fully specified device with high efficiency, no minimum load, 1600VDC isolation, tight regulation and low ripple/noise figures. The trimmable output is fully protected against overtemperature, short circuits, overcurrent and overvoltage. The converter finds many uses in railway applications where board space is at a premium. It has LC internal input filter.

● Input voltage range from 9VDC to 36VDC (24VDC nominal input voltage)

● Output voltage of 15VDC and output current of 4000mA

● Input current of 2680mA

● Efficiency of 93.3% and maximum capacitive load of 4000µF

● Maximum line regulation of ±0.2% (low line to high line)

● Load regulation of ±0.5%

● Start-up time of 60ms (power-up, CTRL ON/OFF) and internal operating frequency of 330KHz

● Ripple and noise of 100mVp-p and maximum output accuracy of ±1%

● Minimum isolation resistance of 10Mohm and typical isolation capacitance of 2200pF

● Maximum case temperature of 105°C