●The SN65DSI86-Q1 DSI to embedded DisplayPort (eDP) bridge features a dual-channel MIPI D-PHY receiver front-end configuration with four lanes per channel operating at 1.5 Gbps per lane and a maximum input bandwidth of 12 Gbps. The bridge decodes MIPI DSI 18-bpp RGB666 and 24-bpp RGB888 packets and converts the formatted video data stream to a DisplayPort with up to four lanes at either 1.62 Gbps, 2.16 Gbps, 2.43 Gbps, 2.7 Gbps, 3.24 Gbps, 4.32 Gbps, or 5.4 Gbps.
●The SN65DSI86-Q1 is well suited for WQXGA at 60 frames per second, as well as 3D graphics at 4K and true HD (1920 × 1080) resolutions at an equivalent 120 fps with up to 24 bpp. Partial line buffering is implemented to accommodate the data stream mismatch between the DSI and DisplayPort interfaces.
●Designed with industry compliant interface technology, the is compatible with a wide range of microprocessors, and is designed with a range of power management features, including panel refresh support, and the MIPI defined ultralow power state (ULPS) support.
●The SN65DSI86 Q1 is implemented in a 10-mm × 10-mm HTQFP at 0.5-mm pitch package, and operates across a temperature range from –40°C to +85°C.
●In the rest of this document, the SN65DSI86-Q1 is referred to as SN65DSIx6 or DSIx6.
● Embedded DisplayPort (eDP) 1.4 Compliant
●Supporting 1, 2, or 4 Lanes at 1.62 Gbps (RBR),
●2.16 Gbps, 2.43 Gbps, 2.7 Gbps (HBR), 3.24
●Gbps, 4.32 Gbps, or 5.4 Gbps (HBR2).
● Implements MIPI® D-PHY Version 1.1 Physical
●Layer Front-End and Display Serial Interface (DSI)
●Version 1.02.00
● Dual-Channel DSI Receiver Configurable for One,
●Two, Three, or Four D-PHY Data Lanes Per
●Channel Operating up to 1.5 Gbps Per Lane
● Supports 18 bpp and 24 bpp DSI Video Packets
●With RGB666 and RGB888 Formats
● Suitable for 60 fps 4K 4096 × 2304 Resolution at
●18 bpp Color, and WUXGA 1920 × 1200
●Resolution with 3D Graphics at 60 fps (120 fps
●Equivalent)
● MIPI Front-End Configurable for Single-Channel
●or Dual-Channel DSI Configuration
● Supports Dual-Channel DSI Odd, Even and Left,
●Right Operating Modes
● 1.2-V Main VCC Power Supply and 1.8-V Supply
●for Digital I/Os
● Low-Power Features Include Panel Refresh and
●MIPI Ultralow Power State (ULPS) Support
● DisplayPort Lane Polarity and Assignment
●Configurable.
● Supports 12-MHz, 19.2-MHz, 26-MHz, 27-MHz,
●and 38.4-MHz Frequencies Through External
●Reference Clock (REFCLK)
● ESD Rating ±2 kV (HBM)
● Packaged in 64-Terminal HTQFP (PAP)
● Temperature Range: –40°C to +85°C
