● Compatible With HDMI v1.2a (Type A) DVI 1.0
●High-Speed Digital Interface
● Wide Bandwidth to support throughput of
●over 1.65 Gbps (Data rate 1.9 Gbps Typ)
● Serial Data Stream at 10× Pixel Clock Rate
● Supports All Video Formats up to 1080p
●and SXGA (1280 × 1024 at 75 Hz)
● Total Raw Capacity 4.95 Gbps (Single Link)
● HDCP Compatible
● Compatible with SXGA Video Display formats
●up to 1080P (1280 × 1024 at 75Hz)
● Low Crosstalk (XTALK = 37 dB Typ)
● Low Bit-to-Bit Skew (tsk(o) = 0.1 ns Max)
● Low and Flat ON-State Resistance
●(ron = 4 Typ, ron(flat) = 0.5 Typ)
● Low Input/Output Capacitance
●(CON = 8 pF Typ)
● Rail-to-Rail Switching on Data I/O Ports
●(0 to 3.6 V)
● VCC Operating Range From 3 V to 3.6 V
● Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
● ESD Performance Tested
● 14-kV Human-Body Model Per JESD 22
●(A114-B, Class II)
● 7.5-kV Contact Discharge Per IEC 61000-4-2
● Applications
● DVI/HDMI Signal Switching
● Differential DVI, HDMI Signal Multiplexing for
●Audio/Video Receivers and High-Definition
●Televisions (HDTVs)
●## DESCRIPTION/ORDERING INFORMATION
●The TS3DV520E is a 20-bit to 10-bit multiplexer/demultiplexer digital video switch with a single select (SEL) input. SEL controls the data path of the multiplexer/demultiplexer. The device provides five differential channels for digital video signal switching.
●This device provides low and flat ON-state resistance (ron) and excellent ON-state resistance match. Low input/output capacitance, high bandwidth, low skew, and low crosstalk among channels make this device suitable for various digital video applications, such as DVI and HDMI.
●Voltage on the SEL pin should be less or equal to VCC, even in the power-down mode
●(VCC = 0 V).
