●"Spartan®-7 Family: Optimized for low cost, lowest power, and high I/O performance. Available in low-cost, very small form-factor packaging for smallest PCB footprint. Built on a state-of-the-art, high-performance, low-power (HPL), 28 nm, high-k metal gate (HKMG) process technology, 7 series FPGAs enable an unparalleled increase in system performance with 2.9 Tb/s of I/O bandwidth, 2 million logic cell capacity, and 5.3 TMAC/s DSP, while consuming 50% less power than previous generation devices to offer a fully programmable alternative to ASSPs and ASICs. "
● Advanced high-performance FPGA logic based on real 6-input lookup table (LUT) technology configurable as distributed memory.
● 36 Kb dual-port block RAM with built-in FIFO logic for on-chip data buffering.
● High-performance SelectIO™ technology with support for DDR3 interfaces up to 1,866 Mb/s
● High-speed serial connectivity with built-in multi-gigabit transceivers from 600 Mb/s to maximum rates of 6.6 Gb/s up to 28.05 Gb/s.
● A user configurable analog interface (XADC), incorporating dual 12-bit 1MSPS analog-to-digital converters with on-chip thermal and supply sensors.
● DSP slices with 25 x 18 multiplier, 48-bit accumulator, and pre-adder for high-performance filtering, including optimized symmetric coefficient filtering.
● Powerful clock management tiles (CMT), combining phase-locked loop (PLL) and mixed-mode clock manager (MMCM) blocks for high precision and low jitter.
● Integrated block for PCI Express® (PCIe), for up to x8 Gen3 Endpoint and Root Port designs.
● 256-bit AES encryption with HMAC/SHA-256 authentication, and built-in SEU detection and correction.
Part 3D Model
