●This single D-type flip-flop is designed for 1.65-V to 5.5-V VCC operation.
●The SN74LVC1G374 features a 3-state output designed specifically for driving highly capacitive or relatively low-impedance loads. This device is particularly suitable for implementing buffer registers, input/output (I/O) ports, bidirectional bus drivers, and working registers.
●On the positive transition of the clock (CLK) input, the Q output is set to the logic level set up at the data (D) input.
●A buffered output-enable (OE) input can be used to place the output in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the output neither loads nor drives the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components.
●OE does not affect the internal operations of the flip-flop. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.
●To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
●To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
●This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
● Qualified for Automotive Applications
● Supports 5-V VCC Operation
● Inputs Accept Voltages to 5.5 V
● Max tpd of 4 ns at 3.3 V
● Low Power Consumption, 10-µA Max ICC
● ±24-mA Output Drive at 3.3 V
● Ioff Supports Partial-Power-Down Mode
●Operation
● Latch-Up Performance Exceeds 100 mA Per JESD 78,
●Class II
● ESD Protection Exceeds JESD 22
● 2000-V Human-Body Model (A114-A)
● 200-V Machine Model (A115-A)
● 1000-V Charged-Device Model (C101)
